Industrial Furnaces

Our products are based on infrared technology with faster heating and cooling options. Adhering to strict quality standards, our products are especially designed to fulfill custom needs of our clients as per automation industrial needs and requirements.

1. Wire Patenting Furnaces (Heat Treatment of High Carbon Steel Wire)

MAK Thermal designs & manufactures plant & Equipment for the complete process of steel wire & narrow strips heat treatment, from the drawn wire through to the finished end products. MAK provides engineering, design, manufactures, Erection & Commissioning and After Sales & Service.

The range of heat treatment plants using bell-type, Channel and chamber furnaces for annealing, patenting, hardening, tempering,galvanizing and chemical treatment.
  • Extremely low consumption compared the previous consumption 
  • Energy exactly where it is needed.
  • Maximum use of the waste gases.
  • Avoid heat losses : Reduced dimensions size
  • Easy maintenance of the muffle
  • Fuel Used: LPG, Natural Gas

2. Heat Treatment Furnaces

MAK manufactures & design in gas fired heat treatment furnaces up to 650’C. Higher temperatures, up to 1200’C, are available on customer demand and also burner and gas technology.

The furnaces are controlled by either temperature controllers or by Automation PLC Systems like Mitsubishi or Siemens dependent on the functionality of the furnace.We offer following type of Aluminum Melting Furnace :
  • Bogie Hearth Type /Car Bottom Type Heat Treatment Furnace
  • Continuous Furnaces for Heat Treatment (Hardening, Tempering, Normalizing)
  • Pit Type Heat Treatment Furnace
  • Box Type Heat Treatment Furnace

3. Aluminum Melting/Holding Furnace

MAK manufactures & design in gas fired heat treatment furnaces up to 650’C. Higher temperatures, up to 1200’C, are available on customer demand and also burner and gas technology.

This Furnace is designed for continuous operation and is suitable for aluminium die casting aluminium casting industries.
  • Fuel Used: LPG, Natural Gas
  • Low Maintenance cost
  • Super Working Conditions
We offer following type of Aluminium Melting Furnace:
  • Tilting type melting furnace (Manually / Hydraulic)
  • Crucible type holding furnace

4. Hot Dipped Galvanizing Plants

    • We have an experienced team of engineers, technicians and commercial staff.
    • MAK probably the largest ‘Independent’ professional hot dip galvanizing plant designerand equipment supplier in all over India. Expertise combined with the confidentiality ofan Independent supplier your best choice for plant design and Equipment.

5. Rotary Hearth Furnace

Steel mills generate various kinds of dust that are produced during the steel making process. Among these, dust containing large quantities of zinc cannot be directly recycled in the steelmaking process. Rotary hearth furnaces remove zinc from the dust and allow it to be efficiently recycled in the steelmaking process by producing, through reduction, direct-reduced iron containing large quantities of metallic iron. This enables the achievement of zero emissions.

Flexible, High Volume Design for Hardening, Heating for Hot Working and Heat Treatment
  • Unique loading systems for a wide range of products
  • Automation systems including product tracking available
  • Multiple burner configurations possible
  • Unique reliable table advance mechanism
  • Hardening or heating for hot working
  • Single Door and Multiple Door Designs
  • Special Energy saving burner technology utilized
  •